Test Wheel Abrasion Measurement System
Measuring abrasion of test wheel mounting holes to store small capacitors like MLCC
Classification of classification by total inspecting the worn condition of the hole
Periodic management of test wheel condition and stock linked with manufacturing process
Feature
-
Process Performance
· Measuring range: X - 450mm, Y - 500mm, Z - 150mm
· Application of adsorbable porous ceramic vacuum chuck
· Optical system – CCD camera, coaxial light, ring light, telecentric lens
· Bad hole marking system
· Application of chamber & area sensor for safety
-
Productivity / Hardware
· The maximum length X minimum length of hole since the shape of the hole is NOT uniform
· Outer Diameter of the Workpiece: Min – Ø274mm, Max – Ø380mm
· Tact Time: < 10 min (Only measuring time)
· Automatically mark defective holes with a stamp
· Receive parts information with the barcode reader
· Customize Hardware / UI Software
Specifications
Parameter | Categorization | Travel Length | Type |
Measuring Machine | X | 500mm | DC Servo Motor & LM Guide |
Y | 600mm | DC Servo Motor & LM Guide | |
Z | 150mm | DC Servo Motor, Ball Screw & LM Guide | |
Vacuum chuck | Width X Height | 450mm X 450mm | SUS Base Porous Ceramic Chuck |
MPE | XY = 2.5+L/300, Z=2.5+L/200 (um, L:mm) | ||
■ Customizable Hardware/Software UI
